96" Huge Pancha-Mukhi Lord Ganesha | Wood | Handmade | Made In India

$10,495
A panchamukha Lord Ganesha, after the style of South Indian temple architecture. ‘Pancha’ is Sanskrt for five, ‘mukha’ for faces. The panchamukha roopa (manifestation) of Lord Ganesha deviates from His usual iconography as a baala-deva (child-deity) whose personality is marked by childlike innocence and wisdom. Instead, the pancha mukha of the Lord Ganesha that you see on this page are the five faces of a well-rounded warrior, son of the destructive Shiva and the powerful Durga, the all-powerful prince of paraloka (heavenly realm of existence).
Item Code: ZEO035
Specifications:
South Indian Temple Wood Carving
Dimensions 96.00 inch Height X 53.00 inch Width x 1
Handmade
Handmade
Free delivery
Free delivery
Fully insured
Fully insured
Shipped to 153 countries
Shipped to 153 countries
More than 1M+ customers worldwide
More than 1M+ customers worldwide

A murti as grand as this occupies pride of place in a South Indian temple of yore. It depicts Lord Ganesha with ten arms - He is dashabhujadhari, the one possessed of (‘dhari’) ten (‘dasha’) arms (‘bhuja’) - eight of them wielding weapons that reiterate His status as divine warrior. In His anteriormost hands are the broken tusk and a freshly made laddoo, which are indicative of His scholarly authorship of the Mahabharata and His childlike predilection for dessert.


A lotus of richly coloured pedestals is His throne. The silver of His sashes and jewellery that descend upon it serves to bring out its gorgeous colour. The same is flanked by the mouse-vahana and a bowlful of golden laddoos. A broad-based platform of an upturned silver lotus, and an aureole of gold lotus petals trimmed with red and green pastel tones. A beady-eyed Kirtimukham at its zenith completes the composition.


Sculpting Serenity: Unveiling the Art of Crafting Wood Statues

Wood has been a preferred material for sculptures and statues since ancient times. It is easy to work with than most metals and stones and therefore requires less effort to shape it into any desired shape or form. The texture of the wood gives an element of realism to the sculpture. The selection of an appropriate wood type is necessary for carving. Woods that are too resinous or coniferous are not considered good for carving as their fiber is very soft and thus lacks strength. On the other hand, wood such as Mahogany, Oakwood, Walnut wood, Weet cherry wood, etc., are preferred by sculptors because their fiber is harder. A wood sculptor uses various tools such as a pointed chisel in one hand and a mallet in another to bring the wood to the desired measurement and to make intricate details on it. A carving knife is used to cut and smooth the wood. Other tools such as the gouge, V-tool, and coping saw also serve as important tools in wood carving. Although the wood carving technique is not as complex and tough as stone carving or metal sculpting, nonetheless, a wood carver requires a high level of skills and expertise to create a stunning sculpture.

1. Selecting the right wood

The process of wood carving begins with selecting a chunk of wood that is required according to the type and shape of the statue to be created by the sculptor. Both hardwoods and softwoods are used for making artistic pieces, however, hardwoods are preferred more than softer woods because of their durability and longevity. But if heavy detailing is to be done on the statue, wood with fine grain would be needed as it would be difficult to work with hardwood.
Image

2. Shaping the wood

Once the wood type is selected, the wood carver begins the general shaping process using gouges of various sizes. A gouge is a tool having a curved cutting edge which is useful in removing large unwanted portions of wood easily without splitting the wood. The sculptor always carves the wood across the grain of the wood and not against it.
Image

3. Adding detailing

When a refined shape of the statue is obtained, it is time for making details on the statue using different tools. This is achieved by using tools such as a veiner to make and a V-tool to create decorative and sharp cuts.
Image

4. Surface finishing

Once finer details have been added, the sculptor is ready to smoothen the surface and give it a perfect finish. Tools such as rasps and rifflers are used to get a smooth surface. The finer polishing is obtained by rubbing the surface with sandpaper. If a textured surface is required, this step is skipped. Finally, to protect the statue from excessive dirt accumulation, the sculptor applies natural oils such as walnut or linseed oil all over it. This also brings a natural sheen to the statue.
Image

How to care for Wood Statues?


Wood is extensively used in sculpting especially in countries like China, Germany, and Japan. One feature that makes the wood extremely suitable for making statues and sculptures is that it is light and can take very fine detail. It is easier for artists to work with wood than with other materials such as metal or stone. Both hardwoods, as well as softwood, are used for making sculptures. Wood is mainly used for indoor sculptures because it is not as durable as stone. Changes in weather cause wooden sculptures to split or be attacked by insects or fungus. The principal woods for making sculptures and statues are cedar, pine, walnut, oak, and mahogany. The most common technique that sculptors use to make sculptures out of wood is carving with a chisel and a mallet. Since wooden statues are prone to damage, fire, and rot, they require proper care and maintenance.

 

  • Wood tends to expand and contract even after it has been processed, thus it is always recommended to keep the wooden sculptures in rooms with little humidity. Excess moisture can harm your masterpiece.

 

  • Periodical dusting of the finished piece is necessary to maintain its beauty as dust accumulation on the surface takes away the shine of the sculpture. You can use a clean and soft cloth or a hairbrush for this purpose.

 

  • You must avoid applying any chemical-based solutions that may damage the wood from the inside. Instead, you can apply lemon oil or coconut oil using a cotton rag to the sculpture to bring out its natural shine. Lemon oil also helps to clean any stains on the sculpture.

 

  • Applying a layer of beeswax protects the wood from sun damage and hides even the smallest imperfections on the wood.

 

It is extremely important to preserve and protect wooden sculptures with proper care. A little carelessness and negligence can lead to their decay, resulting in losing all their beauty and strength. Therefore, a regular clean-up of the sculptures is a must to prolong their age and to maintain their shine and luster. 

Add a review
Have A Question

For privacy concerns, please view our Privacy Policy