12" Buddha’s Statue in Bust Form In Brass

$380
FREE Delivery
Protective Lacquer Coating
Quantity
Delivery Usually ships in 10 days
Item Code: RT85
Specifications:
Brass Sculpture
Height: 12.5 inch
Width: 12.5 inch
Depth: 5 inch
Weight: 6.54 kg
Handmade
Handmade
Free delivery
Free delivery
Fully insured
Fully insured
Shipped to 153 countries
Shipped to 153 countries
More than 1M+ customers worldwide
More than 1M+ customers worldwide

This masterpiece of the rarest kind cast from finest brass polished to reveal a mirror finish surface illuminating gold-like and abounding in great divine aura, as if the intrinsic light exploding beyond, represents just in the part of his figure the ‘Samagra’ Buddha, the great Master in his entirety. Far more than an anatomy the statue seeks to represent the Buddha’s divine composure and the spiritual quality – all condensed into his bust or rather into his mere face. Besides that the bright copper with green of the ‘ushnisha’ – diadem, in the Buddhist iconography, his hair shaped like a diadem, and ‘sanghati’ – the textile length that Buddhist monks carried on their shoulders, affords to the lustrous golden hue the most brilliant contrast the image bathes in the light’s strange magic when it falls on it low and high. A highly simplified form the artist has sought to represent his image of the Buddha – the Enlightened Master, especially the quality of his mind, not in the anatomy of his figure but just in the divine quiescence of his face.

Anthropological studies bring to light signs of some early personalized deity forms and ritual practices prevalent among ethnic populations. In subsequent historical phase too, the ‘divine image’ was a much sought of thing for devotional practices since initial times; however, in the known past, at least after the priestly-courtly art began, scriptures preceded image. They not only preceded image on time-scale but were also the image’s primary source. As such, the deity-image was by and large illustrative – illustrating the deity in a narrative – a myth or legend, involving some divine role or act. Even when isolated, detached or personalized, this image evolved out of scriptures – mythology, religious beliefs or dogma, and was mostly operative, and often with a prescribed anatomy and iconography. Obviously, in any case the deity manifested in act, and the ‘act’ manifested in the figure that could operate – a figure complete in all respects. A figure operating against a host of demons could have more arms than normal two but not less. Even the Buddha’s images, the earliest among the personalized, were conceived with one operative aspect or the other : engaged in penance, defeating Maras, delivering his first sermon …

Hence, except rarely when conceived to represent the deity in a particular mental disposition or aspect, as Shiva in the Tri-murti sculpture at Elephanta, the colossal of Jain Tirthankara Parshvanatha at Gopachala, Gwalior, or some wall-sculptures contained in alcove-like spaces, the Indian sculptor did not resort to represent his deity in bust or head form. A divine image, or a personal sculpture, a bust or head statue is a late cult emerging on Indian scene more emphatically after European art trends began infiltrating into India’s indigenous art forms. Though still with reservations, and not in the same quantum as did the European sculptor, the Indian artist began conceiving his image, male or female, as bust, or even as a mere head, when he sought to represent or reveal a mind, its spiritual quality, divinity, or even intellectualism, that is, when more than the figure’s beauty, poise or even a particular act its spiritual quality or intrinsic being was the artist’s greater concern he went for a sculpture in bust or head form.

The artist has so powerfully conceived his image of the great Master that while looking at the face, the deep quiescence, unfathomable serenity and great divinity enshrining it, one hardly notices that the statue is a mere bust. He perceives in it the ‘Samagra’ Buddha, the Sakyamuni engaged in penance, the Buddha invoking the mother earth, enlightening the world with the divine knowledge … By reducing the aspects that particularized the image the artist has given it multi-dimensionality. Now it represents the Buddha, his totality, or any of his forms he is perceived in. Cast in Tibetan style the image amalgamates best of the traditions of Buddhist sculptures : the fifth-sixth century Gupta sculptures in its modeling, plasticity and power to sublimate, Pala bronzes, in its finish and perfection, and Tibetan own, in spiritual fervor and quality of mind. Unsurpassed in excellence the spiritual quality the image transforms its exterior into the mirror of the interior. A blend of strange divine aura and great aesthetic beauty the image consists of the face, head and the part of the chest with shoulders. Otherwise a plain expanse, except the triangular subdued zones defining armpits, the chest-part seeks its form and rare beauty in the gold-like lustrous ‘sanghati’. Its border embossed with brown creeper design-patterns rendered over a green background, carried over the left shoulder and its end brought back rounding from under the arm most beautifully balances the entire image. The round face with slightly projecting chin, three-fourth shut eyes as immersed in deep meditation imparting to the face its essential bearing, gently couched eyelids, a bird’s wings-like arching eyebrows, broad forehead with the ‘mani’, the symbol of transcendental purity and attainment of ultimate knowledge, a well-defined straight sharp nose, small lips a little wider than the breadth of the nose, elongated ears with further elongated earlobes, ‘Maulashri’ flowers-like knotted hair and a tuft of it with the ‘mani’ atop, defining ‘Ushnisha’, and a neck with three folds, all the characteristic attributes of the classical Buddhist art, define the image of the great Master.

This description by Prof. P.C. Jain and Dr Daljeet. Prof. Jain specializes on the aesthetics of ancient Indian literature. Dr Daljeet is the chief curator of the Visual Arts Gallery at the National Museum of India, New Delhi. They have both collaborated on numerous books on Indian art and culture.


Free Shipping. Delivered by to all international destinations within 3 to 5 days, fully insured.



How to keep a Brass statue well-maintained?


Brass statues are known and appreciated for their exquisite beauty and luster. The brilliant bright gold appearance of Brass makes it appropriate for casting aesthetic statues and sculptures. Brass is a metal alloy composed mainly of copper and zinc. This chemical composition makes brass a highly durable and corrosion-resistant material. Due to these properties, Brass statues and sculptures can be kept both indoors as well as outdoors. They also last for many decades without losing all their natural shine.

 

Brass statues can withstand even harsh weather conditions very well due to their corrosion-resistance properties. However, maintaining the luster and natural beauty of brass statues is essential if you want to prolong their life and appearance.

 

  • The best and simplest way to maintain a brass statue is to clean it at least twice a week using a soft cloth or cotton rag. This will prevent dust from accumulating on the surface. Dusting is especially important for outdoor statues since it is prone to dust accumulation much more than indoors.

 

 

  • To give a natural shine and luster to the statue, you may apply coconut or olive oil using cotton on every portion. You can use a toothbrush to get to the small crevices but do not be too harsh. This will make the brass statue appear fresh and new with a polished look.


  • In case you have a colored brass statue, you may apply mustard oil using a soft brush or clean cloth on the brass portion while for the colored portion of the statue, you may use coconut oil with a cotton cloth. 

 

Brass idols of Hindu Gods and Goddesses are especially known for their intricate and detailed work of art. Nepalese sculptures are famous for small brass idols portraying Buddhist deities. These sculptures are beautified with gold gilding and inlay of precious or semi-precious stones. Religious brass statues can be kept at home altars. You can keep a decorative brass statue in your garden or roof to embellish the area and fill it with divinity. 

Frequently Asked Questions
  • Q. Is the statue hollow or solid ?
    A. Brass statues are made through a process of clay casting, hence are hollow. Whereas, panchaloha bronze statues are made through a process of lost wax casting, hence they are solid.
  • Q. Can I see the original photo of the product ?
    A. For original pictures of the statue, kindly email us at [email protected].
  • Q. Can I return the statue ?
    A. All returns must be postmarked within seven (7) days of the delivery date. All returned items must be in new and unused condition, with all original tags and labels attached. To know more please view our return policy.
  • Q. Can you customise the statue for me ?
    A. For any customisation, kindly email us at [email protected].
Add a review
Have A Question

For privacy concerns, please view our Privacy Policy