Five-Faced Hanuman

Email

Whatsapp

Facebook

Pinterest

Twitter

Copy link

As is the legend, a horse-headed demon, and hence named Hayagriva, born of Diti, the mother of demons and one of the wives of sage Kashyapa, Brahma’s grandson, once performed great penance and propitiated Brahma to grant him the boon of immortality and when Brahma expressed his inability to do so, he conceded that no one other than Hayagriva – one with the face of a horse, could kill him. Hayagriva believed that he would not kill himself and hence considered himself as one beyond death. This led the arrogant demons to inflict atrocities on all. Finally, Vishnu, with his face transformed as of a horse, took to the form of Hayagriva and killed Hayagriva, the demon.

Varaha and Narsimha were Vishnu’s incarnations for accomplishing other objectives. Vishnu is said to have incarnated as Varaha for killing the notorious demon Hiranyaksha and to restore the earth. Hiranyaksha, a mighty demon, once uprooted the earth from its place and dragging it to Patala-Loka – nether world, hid it there. Gods, saints, Brahmins and all prayed Vishnu for freeing the earth from the clutches of Hiranyaksha. Thereupon Vishnu incarnated as Boar, descended into deep waters and after killing Hiranyaksha carried the earth on his tusks and installed it back in its place. Vishnu had incarnated as Narasimha for killing the atrocious demon Hiranyakasipu who had from Brahma the boon that he would not be killed by either of the man or animal. The boon did not provide immunity against blend of two forms : Narasimha, who was neither man nor animal.

The statue represents Hanuman as the central figure of the image and other four faces as his aspects. All five faces are carried over a human torso suggesting the unity of cosmos which despite the outward diversities is just one. Having been in multitudinous divine roles and situations the tradition venerates Hanuman as the representative form of the entire trans-human or animal world. Emerging just for a specific objective Varaha, Garuda, Narasimha or Hayagriva, despite that two of them are Vishnu’s direct incarnations, do not stand on par with Hanuman. Hence, the represented figure has them as Hanuman’s iconic components. Corresponding to five faces the image has ten arms carrying in them various attributes : Purna-ghata, dagger, a medicinal plant, disc, trident, noose, hand-blow and a bowl. The normal two hands are held in ‘abhaya’ and ‘varada’.

Though the figure of Hanuman carries a trident, a Shaivite attribute, as also a ‘Purna-ghata’, a reminiscent of the Mother Goddess cult, his form has been conceived on strict Vaishnava lines. A towering Vaishnava crown, a Vaijayanti-like looking garland trailing down to ankles, his Vishnu’s figures’ like standing posture and many of Vishnu’s attributes, ‘Chakra’ in particular, all endow to the image Vaishnava character. The image has been installed in a ‘Prabhavali’ conceived on strict South Indian lines : the lower half being an architectural unit and the upper, a three-fourth circle comprising lotus design with an elaborate Kirtti-mukha motif. A pair of fish forms, considered as much auspicious, flank the Kirtti-mukha motif. The statue has two female devotees around the Prabhavali’s top and two ascetics around the Prabhavali’s base.

This description by Prof. P.C. Jain and Dr. Daljeet. Prof. Jain specializes on the aesthetics of literature and is the author of numerous books on Indian art and culture. Dr. Daljeet is the curator of the Miniature Painting Gallery, National Museum, New Delhi. They have both collaborated together on a number of books.

Sculpting Serenity: Unveiling the Art of Crafting Wood Statues

Wood has been a preferred material for sculptures and statues since ancient times. It is easy to work with than most metals and stones and therefore requires less effort to shape it into any desired shape or form. The texture of the wood gives an element of realism to the sculpture. The selection of an appropriate wood type is necessary for carving. Woods that are too resinous or coniferous are not considered good for carving as their fiber is very soft and thus lacks strength. On the other hand, wood such as Mahogany, Oakwood, Walnut wood, Weet cherry wood, etc., are preferred by sculptors because their fiber is harder. A wood sculptor uses various tools such as a pointed chisel in one hand and a mallet in another to bring the wood to the desired measurement and to make intricate details on it. A carving knife is used to cut and smooth the wood. Other tools such as the gouge, V-tool, and coping saw also serve as important tools in wood carving. Although the wood carving technique is not as complex and tough as stone carving or metal sculpting, nonetheless, a wood carver requires a high level of skills and expertise to create a stunning sculpture.

1. Selecting the right wood

The process of wood carving begins with selecting a chunk of wood that is required according to the type and shape of the statue to be created by the sculptor. Both hardwoods and softwoods are used for making artistic pieces, however, hardwoods are preferred more than softer woods because of their durability and longevity. But if heavy detailing is to be done on the statue, wood with fine grain would be needed as it would be difficult to work with hardwood.

2. Shaping the wood

Once the wood type is selected, the wood carver begins the general shaping process using gouges of various sizes. A gouge is a tool having a curved cutting edge which is useful in removing large unwanted portions of wood easily without splitting the wood. The sculptor always carves the wood across the grain of the wood and not against it.

3. Adding detailing

When a refined shape of the statue is obtained, it is time for making details on the statue using different tools. This is achieved by using tools such as a veiner to make and a V-tool to create decorative and sharp cuts.

4. Surface finishing

Once finer details have been added, the sculptor is ready to smoothen the surface and give it a perfect finish. Tools such as rasps and rifflers are used to get a smooth surface. The finer polishing is obtained by rubbing the surface with sandpaper. If a textured surface is required, this step is skipped. Finally, to protect the statue from excessive dirt accumulation, the sculptor applies natural oils such as walnut or linseed oil all over it. This also brings a natural sheen to the statue.