•

Lord Ganapati

Email

Whatsapp

Facebook

Pinterest

Twitter

Copy link

FREE Delivery

Express Shipping

Only 1 available

$170

This is a very graceful, light weighted, standing wooden statue of Lord Ganapati. He is the most popular of the Hindu deities worshipped by all sections of the Hindus. He is revered as the remover of obstacles and no undertaking, whether sacred or secular, can get started without honouring worshipping him. He is honored as the god of beginnings. He is easily identifiable because of his elephant like head given by Mother Parvati and Lord Shiva.

He is known by various names like Vinayaka (leader of the group), Vighnesvara or Vighnaraja (Lord of obstacles), Ganesha (Lord of the group).

In this statue there is a mark of Om embedded above Ganesh ji’s trunk increasing his divinity. Eventhough he is a portly figure but still the over all look is a slender one. There are striations on his trunk which are similar to that of an elephants’. The trunk is bending towards the left hand with a laddoo in between, appearing as if eating it. The right hand is in the position of Abhaya Mudra, blessing his devotees. The other two hands are holding weapons: Pasha to capture the evil and wicked. The other is Ankush to give the right path of devotion to people. He has large ears enlightening his good listening nature. He is wearing a wonderful ankle length dhoti and a snake is wrapped around his waist as a symbol of Lord Shiva. There is a long necklace just above his navel and a short one clinged to his neck. He is wearing a sacred thread (Janeu) going down from his left shoulder crossing the stomach and then right side of waist and joining it back to the shoulder passing through the backbone. He is standing on a three layered rectangular base. There is a flower shaped Aureole at the back and an attractive tiara like crown with a three layered small temple top. There is a small mouse on the pedestal, which is Ganesha’s vehicle, representing crushing away of unnecessary and useless thoughts.

Express Shipping: Guaranteed Dispatch in 24 hours

$15

Ships in 1-3 days

Notify me when this item is available

Item Code:	ZEM770
Specifications:	Wood Statue From Jaipur
Height:	8.6 inch
Width:	1.6 inch
Depth:	3.7 inch
Weight:	220 gm

Handmade

Free delivery

Fully insured

Shipped to 153 countries

More than 1M+ customers worldwide

Sculpting Serenity: Unveiling the Art of Crafting Wood Statues

Wood has been a preferred material for sculptures and statues since ancient times. It is easy to work with than most metals and stones and therefore requires less effort to shape it into any desired shape or form. The texture of the wood gives an element of realism to the sculpture. The selection of an appropriate wood type is necessary for carving. Woods that are too resinous or coniferous are not considered good for carving as their fiber is very soft and thus lacks strength. On the other hand, wood such as Mahogany, Oakwood, Walnut wood, Weet cherry wood, etc., are preferred by sculptors because their fiber is harder. A wood sculptor uses various tools such as a pointed chisel in one hand and a mallet in another to bring the wood to the desired measurement and to make intricate details on it. A carving knife is used to cut and smooth the wood. Other tools such as the gouge, V-tool, and coping saw also serve as important tools in wood carving. Although the wood carving technique is not as complex and tough as stone carving or metal sculpting, nonetheless, a wood carver requires a high level of skills and expertise to create a stunning sculpture.

1. Selecting the right wood

The process of wood carving begins with selecting a chunk of wood that is required according to the type and shape of the statue to be created by the sculptor. Both hardwoods and softwoods are used for making artistic pieces, however, hardwoods are preferred more than softer woods because of their durability and longevity. But if heavy detailing is to be done on the statue, wood with fine grain would be needed as it would be difficult to work with hardwood.

2. Shaping the wood

Once the wood type is selected, the wood carver begins the general shaping process using gouges of various sizes. A gouge is a tool having a curved cutting edge which is useful in removing large unwanted portions of wood easily without splitting the wood. The sculptor always carves the wood across the grain of the wood and not against it.

3. Adding detailing

When a refined shape of the statue is obtained, it is time for making details on the statue using different tools. This is achieved by using tools such as a veiner to make and a V-tool to create decorative and sharp cuts.

4. Surface finishing

Once finer details have been added, the sculptor is ready to smoothen the surface and give it a perfect finish. Tools such as rasps and rifflers are used to get a smooth surface. The finer polishing is obtained by rubbing the surface with sandpaper. If a textured surface is required, this step is skipped. Finally, to protect the statue from excessive dirt accumulation, the sculptor applies natural oils such as walnut or linseed oil all over it. This also brings a natural sheen to the statue.

How to care for Wood Statues?

Wood is extensively used in sculpting especially in countries like China, Germany, and Japan. One feature that makes the wood extremely suitable for making statues and sculptures is that it is light and can take very fine detail. It is easier for artists to work with wood than with other materials such as metal or stone. Both hardwoods, as well as softwood, are used for making sculptures. Wood is mainly used for indoor sculptures because it is not as durable as stone. Changes in weather cause wooden sculptures to split or be attacked by insects or fungus. The principal woods for making sculptures and statues are cedar, pine, walnut, oak, and mahogany. The most common technique that sculptors use to make sculptures out of wood is carving with a chisel and a mallet. Since wooden statues are prone to damage, fire, and rot, they require proper care and maintenance.

Wood tends to expand and contract even after it has been processed, thus it is always recommended to keep the wooden sculptures in rooms with little humidity. Excess moisture can harm your masterpiece.

Periodical dusting of the finished piece is necessary to maintain its beauty as dust accumulation on the surface takes away the shine of the sculpture. You can use a clean and soft cloth or a hairbrush for this purpose.

You must avoid applying any chemical-based solutions that may damage the wood from the inside. Instead, you can apply lemon oil or coconut oil using a cotton rag to the sculpture to bring out its natural shine. Lemon oil also helps to clean any stains on the sculpture.

Applying a layer of beeswax protects the wood from sun damage and hides even the smallest imperfections on the wood.

It is extremely important to preserve and protect wooden sculptures with proper care. A little carelessness and negligence can lead to their decay, resulting in losing all their beauty and strength. Therefore, a regular clean-up of the sculptures is a must to prolong their age and to maintain their shine and luster.

Add a review

Have A Question

Comment *

Full Name *

Email *

Mobile

For privacy concerns, please view our Privacy Policy